INERSYS represents renowned medical devices and equipment manufacturers from different parts of the world. Our project experience of over two decades enables us to integrate the most complex medical systems with cost effectiveness and efficiency. Our partners provide us with the required and customized equipment for all our clients’ specific needs and we locally integrate the systems with our engineering team as per the needs, therefore our projects are cost-effective and reliable.
And is capable of designing and executing simple fixtures to complete systems without compromising on the performance with high reliability and quality standards. Our engineers are proficient in mechanical, electrical, instrumentation and software field; working towards a common goal of providing economical, innovative, trouble-free and reliable solutions. They are well-trained and following the correct procedures, methods and relevant standards as per the project. This increases the efficiency, reduces cost and yields better control on the project, thus ensuring product reliability and respective regulatory specifications. Our specialist partners in medical manufacturing devices trusts INERSYS engineering team for their technical proficiency and regional knowledge to comprehend the customers needs, interactions with clients and consultants to make the toughest job simple.
The objective is to provide hospitals with smooth, effective and efficient working environment by proposing cost-effective and innovative patient-care solutions.
We bring in the latest medical technology from the world to the region and offer 24/7 service and management support to our valuable clients.
INERSYS is committed to find effective and sustainable solutions in patient-care, a challenge faced by the healthcare community. Our biomedical team is responsive to the clients’ needs and recommends suitable solutions in consultation with our partners, to contribute substantially to the new and existing healthcare needs.
The focus is on regional responsibility and sustainability to the respective market or end user. It pertains to the healthcare of the region, where our commitment is to introduce latest medical device manufacturers from the world to provide reliable and effective treatment facilities to the region.
And is associated with major global medical devices manufacturers to provide customized engineering solution platforms, which will allow greater control over the rate and duration of the system we provide – across many healthcare specialties.
INERSYS along with principal partner DamVent has introduced the “concept solutions” for FRESH AIR.
It aims at comfort ventilation and air conditioning, we offer "customized solutions" aimed at more sophisticated treatment processes of the air and maintenance the temperature and relative humidity within narrow limits.
In comparison to the standard air-conditioning and ventilation systems, our concept solution has many advantages, like cost effectiveness in various means:
Energy Consumption/Costs - 3 to 3.5 times (300-350%) lesser energy consumption (kWh), compared to “Standard” solution – AHU + Chiller + Pump.
Initial Investment Costs - by removing the need for chiller, extraction fan, pumps and connections between chiller and AHU like pipes, fittings, insulation, etc.
Reduces Labour (installation) Costs - needed for the above-mentioned connections.
Installed Electric Power/Supply Costs - significantly reduces the installed electric power demands; sizes and quantity of cables needed for the HVAC system, etc.
Reduced Time For:
Designers
- to design and implement the solution into the HVAC system. It requires minimum work.
Installers
- to place and install the unit, they only need to connect it to the duct system and provide it with power supply.
Service Technicians
- to start up the unit.
Service and Maintenance - as an “All in One” concept, they are reduced to the minimum. The only thing required is to check and replace the air-filters as recommended. The system has “Internet Monitoring”, which completely eliminate the need of service and maintenance staff.
Building Management System - significantly reduces the costs for a BMS system. The built-in pCO WEB circuit board, allows a permanent internet connection to the equipment from any location in the world and helps you/us to make adequate reaction to situations requiring fast and accurate solutions to the problem. It can interface with more of the widely used communication standards, either directly or via gateways.
Healthcare industry is in a very demanding and highly responsible one. Life is very precious and we all care much more about our wellbeing and hence the hospitals are looking for every solution to satisfy this clients. Managing a hospital with all the facilities and service working round the clock, only a professional engineering company with highly skilled and dedicated workforce can manage.
INERSYS serves as a one-stop solution provider for the healthcare society by providing the best care for the entire hospital from bio-medical equipment, electrical, HVAC, mechanical, civil, water treatment plants, sub-stations and all the technical services. We manage, maintain, service, calibrate the required equipment, monitor, document and analyze every record and provide software based reports whenever our customer demands. Our solutions are based on a custom made software as option and remotely readable and verifiable by our customers. From the time we take over the project to hand over after the contract period we transfer all the data of all the equipment to our customer.
INERSYS as a trusted company by the healthcare society in Oman, is fully responsible for its every actions. We offer a dedicated range of reliable solution of high quality, using latest technologies in the industry and decades of experience. Our goal is to offer personal care for our customers and solutions that fits best each and every time.
Our comprehensive LPG bottling plants are well accepted known in the Middle East and Africa, most suitable and cost effectively engineered and at the same time highly sophisticatedly safe and with minimum maintenance costs and trouble free operation. Multi-capacity filling facility at each station, completely automatic and manual operation with minimum labour. Totally PLC monitored and centrally controlled or manually operated systems. Filling carousel or stand alone filling scales with precision filling capabilities.
Design, Engineering & Preparation of drawings and P & I diagram. Supply of LPG Cylinder Filling Pumps, LPG Compressors, LPG Decanting hose, LPG Filling Machines, Cylinder Weight Check Scale, Conveyor system, Cylinder valve leakage tester, Defective Cylinder Evacuation System, LPG Pipeline system, Air Compressor, Drier, Pneumatic Pipeline systems.
Supply of safety Equipments such as Fire fighting Pump sets, Jockey Pump, Fire hydrant main pipeline system, water sprinkler system, Gas detector system, supports and accessories, Fire safety Equipment, Shrink Seal System.
Electrical & Earthing such as Switchboard Control Panel Unit, Flame Proof Lighting for filling hall, thank yard, decanting point & LPG Pump House; push button stations and emergency stop buttons.
Armored cabling for all electric motors lighting and other fittings earthing system for tanks, pump house, filling hall & all electrical equipment.
Supply, Installation and commissioning of the required capacities of LPG Storage Tanks with all the necessary safety fittings for LPG tanks as per the relevant standards and codes.
Custom made software system to compute the filling activities and gas utilization machine/ operator wise and cumulative to record hourly, daily, weekly and monthly to review the records as an when required from the engineers table. This system can find out any pilferage malpractice and wastage over and under filling of cylinders by the authorities even if they are not present in the plant.
We provide service support to all gas and fuel systems and facilities.
Annual Maintenance, Technical Assistance & Management Services for:
We are an authorized company for LPG tank testing, gas installations’ inspection and certification in the Sultanate of Oman.
Ultra-high purity gases, instrument gases for gas chromatography, atomic emission spectrometry, atomic absorption spectrometry, gas mixtures, electronic gases, gases for optical fiber industry, laboratory and research applications.
High purity gases are used in analytical equipment like gas chromatograph, atomic absorption spectrometer, HPLC, ICP, blood gas analyzer, GC-MS, thermal analysis equipment, bomb calorimeter, etc.
Various types of pure calibration gases like methane, propane, neon, ethylene, Sulphur hexafluoride, n-butane, iso-butane, etc. Calibration gas mixtures can be customized, as per the client's special requirements.
Diverse group of gas products are developed to be used as Industry-specific.
*Refrigerants: New generation refrigerants R-134A, 404A, 407C & R-11, R-12 R-22, R-502, Ammonia.
Our ''All-in-One'' 3 stage cooling, dehumidification, re-heating, recovery, automation and filtration unit is a compact but an efficient system built to last. It is 100% plug and play standalone ''one piece'' unit, which needs only ducts and power supply for its start up. In support of the health care process, HVAC systems are called upon to perform several vital functions that affect environmental conditions, infection and hazard control, and building life safety. MAX.E3-DH series units are designed and manufactured in accordance with all the major international standards:
EN 1886 - Ventilation for buildings - Air handling units - Mechanical Performance: The standard is a part of a series of standards for air handling units, used for ventilation and air conditioning of buildings for human occupancy. It considers the mechanical performance of an air handling unit and will be supported by a standard for sections and components. This standard specifies test methods, test requirements and classifications for air handling units, which are supplying and/or extracting air, via ductwork, for ventilating/conditioning a part or the whole of the building.
VDI 6022-1: 2011-07- Hygiene requirements for ventilation and air-conditioning systems and units:
HTM 03-01 - Specialized ventilation for healthcare premises This document treats not only the ventilating and air-conditioning unit, but also the distribution system. MAX.e3-DH is constructed in accordance with the General technical requirements of this Memorandum. They concern:
ASHRAE - HVAC design manual for hospitals and clinics, which provides in-depth design recommendations based on best practices, and presents proven, cost-effective, and reliable solutions that result in low maintenance cost and high reliability.
MAX.e3-DH is an equipment specially developed for hospitals, where the temperature and the relative humidity have to be in narrow limits (±1oC/±2%) maintained. It is designed to:
Operations Rooms (OR) being the most critical area in a hospital complex, is necessary to control OR air with respect to temperature, humidity & particulate matter content of air, micro-organisms, i.e. bacteria, viruses, fungi etc.
Laminar air flow system (LAF) is non-turbulent air distribution system which is in bell-shaped lanes vertically on the operating table. At the entrance of the plenum is provided with a HEPA filter of 0.3 microns with 99.99% efficiency. The plenum also functions as a light source above the operating area; it has energy efficient LED lights and provides shadow less lighting.
It is necessary to maintain the air velocity in the operating area at the required level and is ensured by LAF. Clean, treated and filtered air coming from LAF over the operative area carries away bacteria from the patient and from the inmates. As per NABH (National Accreditation Board for Hospitals & Healthcare) the air velocity should be between 2.5 – 3.5 CM (meter per minute). We ensure the same in our designs.
Highly clean air of LAF falls in CLASS 100/ISO 5 category. When this air moves further in OT after leaving LAF area it mixes with lesser clean air of the room along with heat, moisture and bacterial load from the operative area; gradually loses its clean state and while it reaches the last point in OR from where it is sucked back to the AHU. Air in peripheral area of LAF normally falls in CLASS 10,000/ISO 100,000 categories, depending on the OT size. LAF can be made in various sizes as per the requirement. AHU can be mounted in different ways; AHU can be kept outside OT, normally floor mounted or can be ceiling suspended above the OR with maintenance accessibility provisions. Return air is taken from almost floor level in OT, sent to the AHU through the VU treatment module, and returned through plenum with fresh air as per the requirements through LAF. Filtered, treated and cooled fresh air is added within AHU. This addition of fresh air also maintains positive pressure in the OR. Since the OR has a positive pressure, the outside room air entering the OR is restricted while the doors are opened. We also provide necessary cascade pressure relief dampers on the wall to relieve excess pressure in hermetically sealed areas.
Galvanized steel/ aluminum/ SS304 jointless with Poly urethane coating 1.5 mm galvanized steel / 2 mm aluminum sheets with frames and suspended sections fixed to the concrete. Joints are filled with metallic filler material. Complete surface is sprayed with antibacterial poly urethane paint. On completion, the ceiling will be seamless finish and looks one piece.
Galvanized steel / aluminum / SS 304 powder coated tiles 600 mm X 600 mm powder coated tiles made of 0.6 mm galvanized steel/ aluminum or SS 304 sheet are fitted in aluminum frame. Joints are filled with antibacterial silicon compound. On completion, the ceiling will be in tiled form with lighter visible grooves.
Galvanized steel/aluminum/SS 304 jointless with poly urethane coat 1.5 mm Galvanized steel / 2 mm aluminum /1.2 mm SS 304 sheets with reinforcements are welded to frames and sections which are fixed to the concrete wall or erected with sub frame. Joints are filled with metallic filler material. Complete surface is sprayed with antibacterial Poly Urethane paint. On completion, the ceiling will be seamless finish and looks one piece.
Fixed double glass glazed windows with motorized curtains can be fitted within the structure. Same level of wall cladding or smaller and window can be provided for natural light.
Galvanized steel/aluminum/SS 304 jointless with poly urethane coat 1.5 mm Galvanized steel / 2 mm aluminum /1.2 mm SS 304 preformed panels are fitted on a frame. Each panel fits in to the slots of the adjacent panel and the wall is finished uniformly. Between vertical grooves of the panels antibacterial silicon rubber sleeve are placed. Panels have interlocking arrangement. On completion, the walls will made of metal with fine vertical grooves.
Vinyl panel cladding 1mm vinyl sheets are fitted on zero level walls. Vertical joints are sealed with thermal welding. Pleasant colors are available.
Glass panels frameless 10mm hardened glass with reinforcement is fitted on each side of wall to obtain a seamless finish. Small gaps between the glass is filled with same colored antibacterial silicon filler.
Vinyl - antistatic & conductive/dissipative Copper strips are placed on the floor as per the requirement for conductivity and are interconnected and grounded. 1/2/3 mm vinyl sheet in roll or tiles fitted on the floor with self-leveling compound. Choice of Colors and designs are available as per the taste and to suite the interior of the OR / ICU complex.
HPCL / aluminum / SS 304 powder coated automatic sliding doors 50mm HPCL (high pressure compact laminate) / SS304 with PUF infilled one-piece shutter sliding on wheels and channel with drop & push action i.e. shutter is dropped down & pushed near wall to make it hermetically sealed when closed. Manual or automatic options are available. Automation with speed control, half/full open, hand sensor or foot push option are available on request.
SS 304, HINGED 1mm SS304 sheet with PUF insulated 45mm thick shutter within 1.2 mm frame. Double glass window in shutters of size 300 mm X 300 mm or 600 mm X 300 mm provided. Door closer, drop seals, tower bolt, dead lock, handles are provided as standard accessories. Additionally, impact protection plates at trolley height can be provided. Door is completely sealed on all sides with no air leakages.
SS 304, HINGED 1mm SS304 sheet with PUF insulated 45mm thick shutter within 1.2 mm frame. Double glass window in shutters of size 300 mm X 300 mm or 600 mm X 300 mm provided. Door closer, drop seals, tower bolt, dead lock, handles are provided as standard accessories. Additionally, impact protection plates at trolley height can be provided. Door is completely sealed on all sides with no air leakages.
SS304 touch screen control panel incorporating membrane type panel with day time, elapsed time, medical gas alarms, hands-free telephone, music etc. Air handling system controls, temperature & humidity indicators, peripheral lighting controls etc. are provided on the panel which is fitted on an SS base plate. Data transfer facility can also be provided.
SS304 touch screen control panel incorporating membrane type panel with day time, elapsed time, medical gas alarms, hands-free telephone, music etc. Air handling system controls, temperature & humidity indicators, peripheral lighting controls etc. are provided on the panel which is fitted on an SS base plate. Data transfer facility can also be provided.
Totally isolated passage for transferring dirty/clean equipment, linen and surgical tools etc. It has glass doors, double locking and interlocking facility.
Automatic gas manifold provides centralized distribution of medical gases, reduces the number of cylinders in ward areas, has built-in safety features to monitor gas distribution within the hospital and gas specific connectors to ensure correct supply. It also ensures that the system does not run out of gas as it has two sets of cylinders, one set in use and the other on standby. Status of the cylinders are monitored, and alarms are provided to indicate the sets of cylinders in service and the requirement of replacement cylinders if any.
The automatic manifold control System offers a complete solution to centralized supply of medical gases from high pressure cylinders for distribution to hospitals and laboratories at the required pressure and flow rate.
The unit is supplied as a complete factory tested package and offers a high quality reliability.
The manifold system is extendable and flexible and can be easily tailor made to meet specific customer requirements or to suit individual applications and plant room layouts.
Systems available as standard in all the required capacity options and suits international/national standards. The system is fully tested, certified and proven to ensure trouble free life time operation to a medical system.
Full warranty offered on all equipment, which commences from commissioning date of the system and extended warranties are also available on request.
Medical air plant provides clean dry medical quality air at 4, 7 or 10 bars pressure at different flow rates as per the requirement; conforms to the requirements of HTM 02-01; include duplex bacterial filters, desiccant dryers and controls; high quality compressors for long trouble-free operation; available in duplex/ triplex/ quadruplex plants and in various capacities.
The compressed air plant provides a complete solution to centralized supply of medical air to hospitals.
The plant is supplied as a package pre-wired, piped and factory tested prior to the supply to the site.
Various models are available with multiple compressors and pressure vessel combinations, with overall layout configurations modified to suit irregular sized and shaped plant rooms.
Manufactured in the UK/EU. All the component parts are made from high quality materials, with other key components from reputable, globally positioned suppliers.
A wide range of power supply options are available to suit every site condition.
Full warranty and technical backup for one year from commissioning with extended warranties and extended technical support packages on request.
Provides medical suction in wards and theatres; includes medical vacuum filters to avoid risk of contamination and high-quality compressors for long trouble free operation; conforms to HTM 02-01 requirement; available duplex/triplex/quadruplex plants.
For the safe and effective removal of waste anesthetic gas; conforming to HTM 02-01 requirements; available simplex / duplex systems.
Our anesthetic gas scavenging system offers a complete solution to centralized AGSS supply to hospitals and laboratories.
The unit is fully automatic in operation and supplied as a complete factory tested package which can easily be tailored to meet specific customer requirements.
The system offers high quality reliable air cooled, oil free side channel exhausters as standard.
Vacuum control valve fitted to automatically regulate vacuum within the pipeline.
Systems available as standard in all voltage and frequency options to suit international electrical standards which ensures trouble free installation and reliable operation.
Full warranty on all equipment, which commences from commissioning date of the system with extended warranties available on request.
Provides local isolation at the entrance to ward areas and theatre suites. Provided with locking mechanism for operation by authorized persons only. Includes ‘break glass panel’ facility for emergency access, as well as gas specific NIST connectors included in the up and down stream.
Our area valve service unit (AVSU) is suitable for new build or extension applications which require a system of secure but accessible medical gas isolation valves.
The unit is designed to be either surface mounted to eliminate builders works or flush mounted into recessed or studded walls. The unit is connected directly to the medical gas mains pipe-work using copper tail pieces supplied as part of the whole assembly.
Each valve is supplied with a blank spade which can be fitted in place of a through spade to form a physical barrier for engineering work to be carried out up or down stream of the valve.
Each valve incorporates 100% shut-off valves within the gas specific NIST connector. All seals can be easily removed to aid installation and future maintenance. Full steel construction front cover and back plate improve fire rating.
Form the user interface with the system; conform to the requirements of BS EN 9170-1:2008 and BS EN 7396-1:2007; color coded body to provide instant gas recognition.
OUR medical gas and vacuum terminal units are suitable for installation into piped medical gas installations within a hospital or laboratory environment.
For refurbishment applications a range of conversion kits are available to convert many other manufacturer’s existing first fix equipment to our outlets, which effectively eliminates builders works in the area of the project.
Special emphasis and consideration at the design stage has resulted in a terminal unit which provide quick, easy to install and maintain; thus, reducing installation time and ownership cost.
The terminal unit is manufactured under strict quality controls in which every terminal unit is subject to full pressure and functionality tests prior to dispatch to the site with a batch number applied for traceability.
Surface/flush, pendant and bed head units applications are all standard options.
Local alarms for up to 6 gases. Local pressure and vacuum switches also supplied. Plant alarms for up to 15 gases in groups of 5 gases, according to the medcon protocol for master alarm panels, and all plant fitted with transmitters built in for easy connection using 2 wire system.
Meets EN ISO 11197:2009. Clean design with epoxy powder finish. Ventilated to avoid build-up of gas within the unit. Fully customizable layout of gas outlets and electrical services. Integrated lighting includes room and reading lights. Available in any color to match or contrast with room colors.
VISOCALL IP brings together care, information, service, organization and billing in hospitals using a common functional platform. IP-based network technology forms the economical, secure and extensible structure for all functions and services in the care sector.
The Most Important Thing: The Safety of the Patients.
The primary aim of nurse call systems in hospitals is to support people in emergency situations, offering quick assistance. Reliability and fault-free functioning therefore have the highest priority.
VISOCALL IP is made up of decentralized blocks that communicate independently with each other. There is no centralized control unit, thereby eliminating the possibility of total system failure. VISOCALL IP is certified in accordance with VDE 0834 – proof of its high level of reliability and permanent system availability. The redundancy concept also provides an extra level of security.
The most important thing: the safety of patients - The primary target of nurse call systems in hospitals is to support people in emergency situations, offering quick assistance. Reliability and fault-free functioning therefore have the highest priority.
A fail-safe system - VISOCALL IP is not dependent on the system’s backbone: The intelligent system elements perform their task even without a network or a server.
Automatic fault detection - VISOCALL IP monitors itself: System faults are automatically detected and are forwarded immediately to the responsible member of the technical staff. Detailed fault descriptions are made available immediately to mobile devices via pagers, DECT, smartphones or tablets.
Without interference in its own communications network - VISOCALL IP uses its own network within wards. Faults in external devices (e.g. diagnostic devices or EDP systems) do not cause the system to be compromised.
Anti-microbial coated surfaces - The anti-microbial surface of the operating devices reduces the risk of pathogens spreading.
Integrating several systems offers entirely new opportunities.
A multitude of different systems and technologies, where the individual branches often even have proprietary interfaces, is accompanied by a multitude of possible sources of errors. Boiling it all down to a common platform increases security and minimizes costs.
Modular software functions make it possible to assemble the system for every operator individually and in a cost-optimized manner, as well as allowing the extension of system functions without needing to interrupt operation. Plug & play system devices and the use of ''IntelliFIX'' self-disconnecting plugs reduce servicing and operating costs.
Use of highly-advanced network technology - VISOCALL IP uses economical standard network technology. Existing network structures can be used.
Modular system: Incremental structure possible - Additional functions like the billing system, the solution for protecting patients with dementia, care data logging or patient entertainment can be activated at any time at a later stage. Ongoing operation is not affected in any way.
Simple to renovate and revitalize - Existing cable ducts can be reused, as a single network cable does not take up much space. Older Schrack Seconet systems can also be functionally integrated into the VISOCALL IP platform, thereby vindicating previous investments.
VISOCALL IP lowers your operating costs - Thanks to the simple structure used, expenses for servicing and maintenance can be minimized.
IntelliFIX: The self-disconnecting plug - The plug yields in the event of tensile loads from any direction. Cables do not tear, sockets are protected, and the most common causes of repair can be avoided. IntelliFIX is also exceptionally cost-optimized and is included on every system device as standard.
Plug & Play: Plug and play socket connections and pluggable modules - When installing or replacing modules there is nothing that can go wrong, what formerly had to be tediously screwed in is now available as a plug-in module. The result is plug & play without time-consuming programming or configuration.
Central upload of firmware and software updates - New functions, software and updates for all devices can be uploaded from a central unit.
Remote diagnosis and remote access - The servicing company that is responsible for maintenance can check the overall state of the system from any location and deploy technicians in a targeted fashion.
Precise information is available quickly and on the move. The devices are intuitive to operate and help to set priorities. The speech function frees staff members from making unnecessary journeys. This saves time and resources.
A hotel-like feeling, offering state of the art convenience and comprehensive range of services, increases the attractiveness of every healthcare establishment.
Top class patient entertainment - Changes in the healthcare system cannot be overlooked: Hospitals are becoming centers for healthcare and are in direct competition with one another. Top class patient entertainment can prove to be a decisive advantage: It increases patients state of well-being, takes their mind off things and informs them - while on the other hand also giving care staff time that can be used for efficient patient care.
Comprehensive use of modern media - Our terminals are oriented in their ability to perform towards the developments in home entertainment and therefore use all the options available from modern communication technology. analogue and digital television and radio reception, AV and USB interfaces, an RJ45 telephone connection, integrate stereo low speakers and a headphone socket are all part of even the smallest model; external devices, such as DVD players, iPods and games consoles can be connected simply. Furthermore, additional models are available for IP-TV, Internet access, games and Video on demand (VoD). A hybrid terminal for analogue and digital reception as well as IP-TV completes the range.
Ideal screen sizes - The various models have been optimized for the most frequent viewing distances. In order to give patients a relaxing experience when watching television, the terminals can be installed on flexible wall-mounted arms or on bedside cabinets.
© 2011-2024 | Innovative Energy Systems LLC
All Rights Reserved